Telephone Cable

Telephone Cable

Telephone & Switchboard cables are designed for improved transmission quality, giving voice clarity and eliminating cross talk. They are most suitable for indoor inter-connection of telephone / intercom systems and EPBX, and in central exchange for distribution, switching and transmission. Use of high purity electrolytic copper conductor of uniform diameter and balanced low resistance eliminates voice loss, giving crisp clarity.

USP:

• HDPE Insulated Conductors.
• Low attenuation.
• Low level of Cross talk  at both the near end and the far end.
• Low voice loss.
• Noise free transmission.
• Total elimination of voice distortion
• Flame retardant Jacket.

Specification: Generally conforming to TEC Spec: G / WIR 06/02 with latest amendments

Product Range:  0.4, & 0.5 mm with 1 pair to 20 pairs.

Applications:

Recommended for switchboard and internal telephone wiring in high rise buildings, offices, factories, hotels, residential complexes, transmission of analogue and digital signals, internal wiring in faxes, modems, computers, alarm enunciators, data recording / acquisition systems and various communication devices.

Conductor: The Conductor is made of electrolytic grade copper drawn on a high speed tandem line.

Insulation: HDPE grade extruded on a Tandem line with online testing of diameter, high voltage, capacitance, centricity.

Twisted Pairs: The cores are twisted with suitable lays and bunched together.  They are covered with polyester tape to avoid ingression of moisture, provide mechanical support and heat resistance  to wires within and minimize the cross talk.

 RipCord: A nylon rip cord is provided in order to safely peel off the Sheath without damage to the cores.

Sheath: The laid up pairs are sheathed with a special Flame Retardant (FR) compound.

Packing:  90m coil / or Higher lengths available on special order.

LAN Cable

Anchor brings the latest in LAN (Local Area Network) Cable technology with high performance ANSI / TIA / EIA 568-B.2 compliant Category 5E UTP (Unshielded Twisted Pair) Cable to fulfill the requirements of high speed data transmission for mission critical LAN applications or structured cabling services. It is capable of carrying high bit-rate signaling for extended distances in horizontal cabling. Signal amplifiers are not required for a length of 100m.

 Special Features:
Low Attenuation and Cross Talk

• Low NEXT ( Near End Cross Talk )
• Low Power sum NEXT
•  Ideal for use in horizontally structured cabling